hlmp-7000, -7019, -7040 t-1 3 / 4 (5 mm), t-1 (3 mm), low current led lamps technical data features ? low power ? high efficiency ? cmos-mos compatible ? ttl compatible ? wide viewing angle ? choice of package styles ? choice of colors applications ? low power dc circuits ? telecommunications indicators ? portable equipment ? keyboard indicators description these tinted diffused led lamps are designed and optimized specifically for low dc current operation. luminous intensity and forward voltage are tested at 2 ma to assure consistent bright- ness at ttl output current levels. package dimensions hlmp-4700, -4719, -4740 hlmp-1700, -1719, -1790 ab hlmp-1700, -1719, -1790 hlmp-4700, -4719, -4740
2 selection guide luminous intensity iv (mcd) at 2 ma package package description color device hlmp- min. typ. max. 2 q 1/2 outline t-1 3/4 tinted diffused red 4700 1.5 2.3 C 50 a 4700-c00xx 1.5 2.3 C 4700-cd0fh 1.5 2.3 4.2 yellow 4719 0.9 2.1 C 4719-a00xx 0.9 2.1 C green 4740 1.0 2.3 C 4740-a00xx 1.0 2.3 C 4740-ab000 1.0 2.3 3.2 t-1 tinted diffused red 1700 0.8 2.1 C 50 b 1700-b00xx 0.8 2.1 C yellow 1719 0.9 2.1 C 1719-a00xx 0.9 2.1 C 1719-abb00 0.9 2.1 2.8 green 1790 1.0 2.3 C 1790-a00xx 1.0 2.3 C 1790-ab0fh 1.0 2.4 3.2 note: 1. q 1 / 2 is the typical off-axis angle at which the luminous intensity is half the axial luminous intensity.
3 part numbering system hlmp-x 7 xx - x x x xx mechanical option 00: bulk 01: tape & reel, crimped leads 02, bh: tape & reel, straight leads a1, b1: right angle housing, uneven leads a2, b2: right angle housing, even leads fh: 2 iv bins select with inventory control color bin options 0: full color bin distribution b: color bins 2 & 3 only maximum iv bin options 0: open (no. max. limit) others: please refer to the iv bin table minimum iv bin options please refer to the iv bin table color option 00: gap her 19: gap yellow 40: gap green 90: gap green package options 4: t-1 3 / 4 (5 mm) 1: t-1 (3 mm)
4 electrical/optical characteristics at t a = 25 c test symbol description t-1 3 / 4 t-1 min. typ. max. units conditions v f forward voltage 4700 1700 1.7 2.0 v 2 ma 4719 1719 1.8 2.5 4740 1790 1.9 2.2 v r reverse breakdown 4700 1700 5.0 v i r = 50 m a voltage 4719 1719 5.0 4740 1790 5.0 l d dominant 4700 1700 626 nm note 1 wavelength 4719 1719 585 4740 1790 569 dl 1/2 spectral line 4700 1700 40 nm halfwidth 4719 1719 36 4740 1790 28 t s speed of response 4700 1700 90 ns 4719 1719 90 4740 1790 500 c capacitance 4700 1700 11 pf v f = 0, 4719 1719 15 f = 1 mhz 4740 1790 18 r q j-pin thermal 4700 1700 260 [3] c/w junction to resistance 4719 1719 290 [4] cathode lead 4740 1790 l peak peak wavelength 4700 1700 635 nm measurement 4719 1719 583 at peak 4740 1790 565 h v luminous efficacy 4700 1700 145 lumens note 2 4719 1719 500 watt 4740 1790 595 notes: 1. the dominant wavelength, l d , is derived from the cie chromaticity diagram and represents the single wavelength which defines the color of the device. 2. the radiant intensity, i e , in watts per steradian, may be found from the equation i e = i v / h v , where i v is the luminous intensity in candelas and h v is luminous efficacy in lumens/watt. 3. t-1 3 / 4 . 4. t-1.
5 absolute maximum ratings parameter maximum rating units power dissipation red 24 mw (derate linearly from 92 c at 1.0 ma/ c) yellow 36 green 24 dc and peak forward current 7 ma transient forward current (10 m s pulse) [1] 500 ma reverse voltage (i r = 50 m a) 5.0 v operating temperature range red/yellow -55 c to 100 c green -20 c to 100 c storage temperature range -55 c to +100 c lead soldering temperature 260 c for 5 seconds [1.6 mm (0.063 in.) from body] note: 1. the transient peak current is the maximum non-recurring peak current the devices can withstand without damaging the led die and wire bonds. it is not recommended that the device be operated at peak currents beyond the absolute maximum peak forward current. figure 2. forward current vs. forward voltage. figure 3. relative luminous intensity vs. forward current. figure 1. relative intensity vs. wavelength. dc current ?ma 0 0 voltage ?v 1.5 6 0.5 1.0 2.5 2 4 8 10 2.0 red yellow green
6 figure 5. relative luminous intensity vs. angular displacement for t-1 lamp. figure 4. relative luminous intensity vs. angular displacement for t-1 3 / 4 lamp. intensity bin limits intensity range (mcd) color bin min. max. red b 0.9 1.5 c 1.5 2.4 d 2.4 3.8 e 3.8 6.1 f 6.1 9.7 g 9.7 15.5 h 15.5 24.8 i 24.8 39.6 j 39.6 63.4 k 63.4 101.5 l 101.5 162.4 m 162.4 234.6 n 234.6 340.0 o 340.0 540.0 p 540.0 850.0 q 850.0 1200.0 r 1200.0 1700.0 s 1700.0 2400.0 t 2400.0 3400.0 u 3400.0 4900.0 v 4900.0 7100.0 w 7100.0 10200.0 x 10200.0 14800.0 y 14800.0 21400.0 z 21400.0 30900.0 maximum tolerance for each bin limit is 18%.
7 intensity bin limits, continued intensity range (mcd) color bin min. max. yellow a 1.0 1.6 b 1.6 2.5 c 2.5 4.0 d 4.0 6.5 e 6.5 10.3 f 10.3 16.6 g 16.6 26.5 h 26.5 42.3 i 42.3 67.7 j 67.7 108.2 k 108.2 173.2 l 173.2 250.0 m 250.0 360.0 n 360.0 510.0 o 510.0 800.0 p 800.0 1250.0 q 1250.0 1800.0 r 1800.0 2900.0 s 2900.0 4700.0 t 4700.0 7200.0 u 7200.0 11700.0 v 11700.0 18000.0 w 18000.0 27000.0 maximum tolerance for each bin limit is 18%.
8 intensity bin limits, continued intensity range (mcd) color bin min. max. green a 1.1 1.8 b 1.8 2.9 c 2.9 4.7 d 4.7 7.6 e 7.6 12.0 f 12.0 19.1 g 19.1 30.7 h 30.7 49.1 i 49.1 78.5 j 78.5 125.7 k 125.7 201.1 l 201.1 289.0 m 289.0 417.0 n 417.0 680.0 o 680.0 1100.0 p 1100.0 1800.0 q 1800.0 2700.0 r 2700.0 4300.0 s 4300.0 6800.0 t 6800.0 10800.0 u 10800.0 16000.0 v 16000.0 25000.0 w 25000.0 40000.0 maximum tolerance for each bin limit is 18%.
9 color categories lambda (nm) color category # min. max. 6 561.5 564.5 5 564.5 567.5 green 4 567.5 570.5 3 570.5 573.5 2 573.5 576.5 1 582.0 584.5 3 584.5 587.0 yellow 2 587.0 589.5 4 589.5 592.0 5 592.0 593.0 tolerance for each bin limit is 0.5 nm. note: all categories are established for classification of products. products may not be available in all categories. please contact your local agilent representative for further clarification/information. mechanical option matrix mechanical option code definition 00 bulk packaging, minimum increment 500 pcs/bag 01 tape & reel, crimped leads, min. increment 1300 pcs/bag for t-1 3/4, 1800 pcs/bag for t-1 02 tape & reel, straight leads, min. increment 1300 pcs/bag for t-1 3/4, 1800 pcs/bag for t-1 a1 t-1, right angle housing, uneven leads, minimum increment 500 pcs/bag a2 t-1, right angle housing, even leads, minimum increment 500 pcs/bag b1 t-1 3/4, right angle housing, uneven leads, minimum increment 500 pcs/bag b2 t-1 3/4, right angle housing, even leads, minimum increment 500 pcs/bag bh t-1, tape & reel, straight leads, minimum increment 2000 pcs/bag fh devices that require inventory control and 2 i v bin select r1 tape & reel, crimped leads, reeled counter clockwise, cathode lead leaving the reel first
www.agilent.com/semiconductors for product information and a complete list of distributors, please go to our web site. for technical assistance call: americas/canada: +1 (800) 235-0312 or (916) 788-6763 europe: +49 (0) 6441 92460 china: 10800 650 0017 hong kong: (+65) 6756 2394 india, australia, new zealand: (+65) 6755 1939 japan: (+81 3) 3335-8152(domestic/interna- tional), or 0120-61-1280(domestic only) korea: (+65) 6755 1989 singapore, malaysia, vietnam, thailand, philippines, indonesia: (+65) 6755 2044 taiwan: (+65) 6755 1843 data subject to change. copyright ? 2003 agilent technologies, inc. september 10, 2003 5988-8054en
|
